[ixpmanager] Issues with aggregated graphs and MRTG in v5.x / Ubuntu 18.04
Barry O'Donovan
barry.odonovan at inex.ie
Tue Jul 23 10:58:30 IST 2019
Hey Andrei,
you've (understandably) cut some details in the below.
Do any of them contain special characters: "&", ":", "@" or " " ?
- Barry
Andrei Dinu wrote on 23/07/2019 10:55:
> Hello Nick,
>
> Below you can see the config.
>
> # pi00090-bits
> Target[pi00090-bits]:
> 1.3.6.1.2.1.31.1.1.1.6#Gi0/3&1.3.6.1.2.1.31.1.1.1.10#Gi0/3:community at ip.add.re <mailto:community at ip.add.re>.ss:::::2
> Title[pi00090-bits]: .. -- Bits / second
> Options[pi00090-bits]: growright,bits , pngdate
> YLegend[pi00090-bits]: Bits / Second
> MaxBytes[pi00090-bits]: 1250000
> Directory[pi00090-bits]: members/4/00068/ints
>
> And the output from the log.
>
> 2019-07-23 12:50:08 -- 2019-07-23 12:50:08: ERROR:
> Target[pi00090-bits][_IN_] ' $target->[85]{$mode} ' did not eval into
> defined data
> 2019-07-23 12:50:08 -- 2019-07-23 12:50:08: ERROR:
> Target[pi00090-bits][_OUT_] ' $target->[85]{$mode} ' did not eval into
> defined data
>
> Best regards,
> *--*
> *Andrei DINU*
> Technical Manager
> Digital IT Consulting
> -----------------------------
> Mobile:
> Fax:
> Web:
>
>
> +40 728 777 794
> +40 314 050 150
> http://www.digitalit.ro <http://www.digitalit.ro/>
>
> Privileged/Confidential information may be contained in this message. If
> you are not in the addresses indicated in this message or responsible
> for delivery of the message to such person you may not copy or deliver
> this message to anyone. In such a case, you should destroy this message
> and kindly notify the sender by reply e-mail.
>
>
>
>
>
>> On 20 Jul 2019, at 12:33, Nick Hilliard (INEX) <nick at inex.ie
>> <mailto:nick at inex.ie>> wrote:
>>
>> Hi Andrei,
>>
>> You're right that these are both MRTG warnings rather than IXP Manager
>> warnings.
>>
>> Can you post the output of Target[pi00090-bits] from your MRTG file?
>>
>> Nick
>>
>>> Andrei Dinu <mailto:andrei.dinu at digitalit.ro>
>>> 15 July 2019 at 11:12
>>> Hello,
>>>
>>> I have an issue after updating to v5.x (Ubuntu 18.04, Perl 5.26, Mrtg
>>> 2.17.4) from v4.9.x (Ubuntu 16.04, Perl 5.22, Mrtg 2.17.4/2.17.7).
>>> The aggregated graphs don’t work anymore, probably it’s related to
>>> MRTG / Perl (most likely). When a port is not working, on the old
>>> version I hit this error in the MRTG logs, which is perfectly fine
>>> and doesn’t affect aggregated graphs:
>>>
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00090-bits][_IN_] ' $target->[85]{$mode} ' did not eval into
>>> defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00090-bits][_OUT_] ' $target->[85]{$mode} ' did not eval
>>> into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00090-pkts][_IN_] ' $target->[224]{$mode} ' did not eval
>>> into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00090-pkts][_OUT_] ' $target->[224]{$mode} ' did not eval
>>> into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00090-bcasts][_IN_] ' $target->[641]{$mode} ' did not eval
>>> into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00090-bcasts][_OUT_] ' $target->[641]{$mode} ' did not eval
>>> into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00068-bits][_IN_] ' $target->[85]{$mode} ' did not
>>> eval into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00068-bits][_OUT_] ' $target->[85]{$mode} ' did not
>>> eval into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00068-pkts][_IN_] ' $target->[224]{$mode} ' did not
>>> eval into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00068-pkts][_OUT_] ' $target->[224]{$mode} ' did not
>>> eval into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00068-bcasts][_IN_] ' $target->[641]{$mode} ' did
>>> not eval into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00068-bcasts][_OUT_] ' $target->[641]{$mode} ' did
>>> not eval into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00185-bits][_IN_] ' $target->[122]{$mode} ' did not eval
>>> into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00185-bits][_OUT_] ' $target->[122]{$mode} ' did not eval
>>> into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00185-pkts][_IN_] ' $target->[261]{$mode} ' did not eval
>>> into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00185-pkts][_OUT_] ' $target->[261]{$mode} ' did not eval
>>> into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00185-bcasts][_IN_] ' $target->[678]{$mode} ' did not eval
>>> into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[pi00185-bcasts][_OUT_] ' $target->[678]{$mode} ' did not eval
>>> into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00102-bits][_IN_] ' $target->[122]{$mode} ' did not
>>> eval into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00102-bits][_OUT_] ' $target->[122]{$mode} ' did not
>>> eval into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00102-pkts][_IN_] ' $target->[261]{$mode} ' did not
>>> eval into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00102-pkts][_OUT_] ' $target->[261]{$mode} ' did not
>>> eval into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00102-bcasts][_IN_] ' $target->[678]{$mode} ' did
>>> not eval into defined data
>>> 2019-07-15 13:05:28 -- 2019-07-15 13:05:28: ERROR:
>>> Target[aggregate-00102-bcasts][_OUT_] ' $target->[678]{$mode} ' did
>>> not eval into defined data
>>>
>>> But in v5.5, I also have these supplementary errors:
>>>
>>> 2019-07-15 12:55:09 -- 2019-07-15 12:55:09: ERROR:
>>> Target[switch-aggregate-00020-bits][_IN_] ' $target->[72]{$mode} +
>>> $target->[85]{$mode} + $target->[132]{$mode} ' (warn): *Use of
>>> uninitialized value in pattern match (m//) at
>>> /usr/share/perl/5.26/Math/BigFloat.pm line 1551.*
>>> 2019-07-15 12:55:09 -- 2019-07-15 12:55:09: ERROR:
>>> Target[ixp001-bcasts][_OUT_] ' $target->[548]{$mode} +
>>> $target->[549]{$mode} + $target->[550]{$mode} +
>>> $target->[551]{$mode} + $target->[552]{$mode} +
>>> $target->[553]{$mode} + $target->[554]{$mode} +
>>> $target->[555]{$mode} + $target->[556]{$mode} +
>>> $target->[557]{$mode} + $target->[558]{$mode} +
>>> $target->[559]{$mode} + $target->[560]{$mode} +
>>> $target->[561]{$mode} + $target->[562]{$mode} +
>>> $target->[563]{$mode} + $target->[564]{$mode} +
>>> $target->[565]{$mode} + $target->[566]{$mode} +
>>> $target->[567]{$mode} + $target->[568]{$mode} +
>>> $target->[569]{$mode} + $target->[570]{$mode} +
>>> $target->[571]{$mode} + $target->[572]{$mode} +
>>> $target->[573]{$mode} + $target->[574]{$mode} +
>>> $target->[575]{$mode} + $target->[576]{$mode} +
>>> $target->[577]{$mode} + $target->[578]{$mode} +
>>> $target->[579]{$mode} + $target->[580]{$mode} +
>>> $target->[581]{$mode} + $target->[582]{$mode} +
>>> $target->[583]{$mode} + $target->[584]{$mode} +
>>> $target->[585]{$mode} + $target->[586]{$mode} +
>>> $target->[587]{$mode} + $target->[588]{$mode} +
>>> $target->[589]{$mode} + $target->[590]{$mode} +
>>> $target->[591]{$mode} + $target->[592]{$mode} +
>>> $target->[593]{$mode} + $target->[594]{$mode} +
>>> $target->[595]{$mode} + $target->[596]{$mode} +
>>> $target->[597]{$mode} + $target->[598]{$mode} +
>>> $target->[599]{$mode} + $target->[600]{$mode} +
>>> $target->[601]{$mode} + $target->[602]{$mode} +
>>> $target->[603]{$mode} + $target->[604]{$mode} +
>>> $target->[605]{$mode} + $target->[606]{$mode} +
>>> $target->[607]{$mode} + $target->[608]{$mode} +
>>> $target->[609]{$mode} + $target->[610]{$mode} +
>>> $target->[611]{$mode} + $target->[612]{$mode} +
>>> $target->[613]{$mode} + $target->[614]{$mode} +
>>> $target->[615]{$mode} + $target->[616]{$mode} +
>>> $target->[617]{$mode} + $target->[618]{$mode} +
>>> $target->[619]{$mode} + $target->[620]{$mode} +
>>> $target->[621]{$mode} + $target->[622]{$mode} +
>>> $target->[623]{$mode} + $target->[624]{$mode} +
>>> $target->[625]{$mode} + $target->[626]{$mode} +
>>> $target->[627]{$mode} + $target->[628]{$mode} +
>>> $target->[629]{$mode} + $target->[630]{$mode} +
>>> $target->[631]{$mode} + $target->[632]{$mode} +
>>> $target->[633]{$mode} + $target->[634]{$mode} +
>>> $target->[635]{$mode} + $target->[636]{$mode} +
>>> $target->[637]{$mode} + $target->[638]{$mode} +
>>> $target->[639]{$mode} + $target->[640]{$mode} +
>>> $target->[641]{$mode} + $target->[642]{$mode} +
>>> $target->[643]{$mode} + $target->[644]{$mode} +
>>> $target->[645]{$mode} + $target->[646]{$mode} +
>>> $target->[647]{$mode} + $target->[648]{$mode} +
>>> $target->[649]{$mode} + $target->[650]{$mode} +
>>> $target->[651]{$mode} + $target->[652]{$mode} +
>>> $target->[653]{$mode} + $target->[654]{$mode} +
>>> $target->[655]{$mode} + $target->[656]{$mode} +
>>> $target->[657]{$mode} + $target->[658]{$mode} +
>>> $target->[659]{$mode} + $target->[660]{$mode} +
>>> $target->[661]{$mode} + $target->[662]{$mode} +
>>> $target->[663]{$mode} + $target->[664]{$mode} +
>>> $target->[665]{$mode} + $target->[666]{$mode} +
>>> $target->[667]{$mode} + $target->[668]{$mode} +
>>> $target->[669]{$mode} + $target->[670]{$mode} +
>>> $target->[671]{$mode} + $target->[672]{$mode} +
>>> $target->[673]{$mode} + $target->[674]{$mode} +
>>> $target->[675]{$mode} + $target->[676]{$mode} +
>>> $target->[677]{$mode} + $target->[678]{$mode} +
>>> $target->[679]{$mode} + $target->[680]{$mode} +
>>> $target->[681]{$mode} + $target->[682]{$mode} +
>>> $target->[683]{$mode} + $target->[684]{$mode} ' (warn): *Use of
>>> uninitialized value in pattern match (m//) at
>>> /usr/share/perl/5.26/Math/BigFloat.pm line 1551.*
>>> *
>>> *
>>> Any workaround on this issue?
>>>
>>> Thank you,
>>> *--*
>>> *Andrei DINU*
>>> Technical Manager
>>> Digital IT Consulting
>>> -----------------------------
>>> Mobile:
>>> Fax:
>>> Web:
>>>
>>>
>>> +40 728 777 794
>>> +40 314 050 150
>>> http://www.digitalit.ro <http://www.digitalit.ro/>
>>>
>>> Privileged/Confidential information may be contained in this message.
>>> If you are not in the addresses indicated in this message or
>>> responsible for delivery of the message to such person you may not
>>> copy or deliver this message to anyone. In such a case, you should
>>> destroy this message and kindly notify the sender by reply e-mail.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> INEX IXP Manager mailing list
>>> ixpmanager at inex.ie
>>> Unsubscribe or change options here:
>>> https://www.inex.ie/mailman/listinfo/ixpmanager
>>
>> _______________________________________________
>> INEX IXP Manager mailing list
>> ixpmanager at inex.ie <mailto:ixpmanager at inex.ie>
>> Unsubscribe or change options here:
>> https://www.inex.ie/mailman/listinfo/ixpmanager
>
>
>
> _______________________________________________
> INEX IXP Manager mailing list
> ixpmanager at inex.ie
> Unsubscribe or change options here: https://www.inex.ie/mailman/listinfo/ixpmanager
>
--
Kind regards,
Barry O'Donovan
INEX Operations
https://www.inex.ie/support/
+353 1 531 3339
More information about the ixpmanager
mailing list